I supply the following parts for the MFD3SD Waltzer model.  The prices shown for the drive are for the bevel geared version.  If you are using the contrate geared version please contact me with your requirements.  1/16th scale prices shown in brackets where different.  Please note that, as I run down to retirement, all machined parts are now made individually to order.  The following prices are those last charged when the parts were made in batches and given as a rough guide.  Please enquire for current prices.

Centre pole tube – £16 a length machined (£21).
Rotating bush – £67 (£95).
Truck bush – £54 (£88).
Paybox bush – £54 (£88).
Plywood cheese with pins fitted – £72 (£85).
Pair of bevel gears – £86.58 machined to suit.
Length of 1/8” thick aluminium for motor mount – £9 (£12).
Thrust washer – £7 (£28).
Spacer (bevel to cheese) – £25 (£30).
Airpax Motor – £64 (£75).
Steering pivot boss with pivot rod fitted – £18 (£36).
Set of four brake drums – £45 (£52).
Set of 18 machined wheels, axles and LEGO tyres with instructions – £75 alternatively our machined Nylatron wheels are £56.70 – see latest plans for details.
Set of 18 ball race car wheels – £94, including channel and screws for brackets.
Set of 9 car pivots – £135 including collars, angle for brackets and fiixings.
Etched brass platform rings – set of nine £29 (1/24th scale only).
3/8″ x 1/4″ channel – one foot length – £6

For 1/16th scale only – collar to fit over cheese – £29.

New car bearing, does away with car pivots and car wheels and gives perfect car spinning – mimics latest slew ring type cars – £66 for set of nine.

Flowing hair panels –
1/24th scale – 67mm x 22mm – £3.50 each
1/16th scale – 95mm x 33mm – £5.50 each
1/12th scale – 150mm x 52mm – £8 each